What is A Steam Trap | Bẫy Hơi Là Gì | Cốc Xả Nước Ngưng

bay hoi

Steam Traps

___________________________________________________

What is A Steam Trap ?

- Steam trap is the important device for a heat control . A heat control can not be carried out without this device

- Steam traps are also known as cot valves, steam cups, condensers, and condensers all have their English names as Steam traps. Steam traps are mechanical devices used to separate condensate from the system. This is a fully automatic operating valve to remove the water contained in the steam, or gas before entering the operating system.

- In the early years of the 18th century, after the industrial revolution, the type used hot steam in industrial production applications. In these early years the steam was normally removed by the drain valve, which was operated manually and lost a lot of steam. Then around 1860 metal steam traps began to be used, and in 1966 steam traps were developed.

___________________________________________________

Types of Steam Trap

• Mechanical Steam Traps

- Based on the law of the density of matter, mechanical steam traps designed apply the above law. The weight of the lighter gas or vapor is carried to the top and the heavier water should be condensed to the bottom and deposited in the container. When the amount of water in the tank reaches a large value, the float will be raised and the condensate in the container is discharged to the outside, and the float is gradually lowered and closed the drain cup. The valve is operated fully automatically, the process is continuously repeated to help steam and gas to be thoroughly treated to remove water and provide for the system to operate. There are two main types of mechanical steam traps: float steam traps and upside down steam traps

bay hoi co hoc

Mechanical Steam Traps

___________________________________________________

- Ball Float Steam Trap

Excellent durability of stainless steel disc, seat, and ball float. Inbuilt air vent assembly to eliminate air-binding. All parts are installed at the bonnet, and the integral bonnet would be helpful for easy maintenance.

+ Structure of Ball Float Steam Trap

Xem Chi Tiết: Bẫy Hơi Phao

cau tao bay hoi phao

Ball Float Steam Trap

___________________________________________________

+ Operation of Ball Float Steam Trap

bay hoi phao

Operation of Ball Float Steam Trap

___________________________________________________

- Bucket Steam Trap

It is and inverted type steam trap suitable for the heat exchangers, dryers and steam press, constructionally solving the air trouble by itself. All of the working parts are installed at the inside of the bonnet for easy disassembly and maintenance.

+ Structure of Bucket Steam Trap

Xem Chi Tiết: Bẫy Hơi Úp Ngược

cau tao bay hoi up nguoc

Structure of Bucket Steam Trap

___________________________________________________

+ Operation of Bucket Steam Trap

bay hoi up nguoc

Operation of Bucket Steam Trap

___________________________________________________

• Thermostatic Steam Traps

- Typical characteristics of thermostatic steam traps is to aperate according to the difference in temperature of steam and condensate. As the condensate cool, the liquid condenses lowers the internal pressure of the membrane. The resultant pressure differential will favor the external pressure acting on the membrane to retract and open the orifice, permitting the condensate discharge.

- Based on the difference in temperature, the pressure should be equal and the thermal expansion. Thermostatic steam traps are used to remove water from the steam, before entering the operating system. The principle of operation of a thermostatic steam trap is based on the expansion of hot steam and the contraction of condensate, so the steam trap operates on the control of heat and condensate. Thermostatic steam traps work well in saturated steam systems, in addition to having the ability to discharge condensate at system start-up. The most commonly used thermostatic steam traps are bimetallic steam traps.

- Types of Thermostatic Steam Traps : Liquid Expansion, Balance Pressurized, Bi-metallic, Bellowed.

- Insulation chamber(air warm) is adopted to lessen the affect of atmosphere and to improve the most suitable working conditions.

- The maintenance and repair of disc and are easy owing to its material of high-hardness-treated stainless steel and its replaceable seat.

 

Bẫy Hơi Lưỡng Kim

___________________________________________________

- Bẫy Hơi Lưỡng Kim

+ Cấu Tạo Bẫy Hơi Lưỡng Kim

cau tao bay hoi luong kim

Cấu Tạo Bẫy Hơi Lưỡng Kim

___________________________________________________

+ Nguyên Lý Hoạt Động Bẫy Hơi Lưỡng Kim

Bẫy Hơi Nhiệt Tĩnh

___________________________________________________

• Thermodynamic Steam Traps

- Thermodynamic steam traps operate periodically according to the difference in dynamic pressure of steam and condensate and discharge the condensate at the same temperature of the steam. Steam entering the trap expands suddenly as it reaches the backside of the disc. The resulting high flow velocity causes a decrease in pressure under the disk. Steam above the disc gets high pressure force and this pressure balance forces the disc onto the seat to close the orifice in other words to trap the steam.

- When condensate appears at the trap inlet under and above the disc the pressure force above the disc disappears and allows the condensate discharge.

- Based on the difference of pressure, velocity, flow, thermodynamic steam trap works on the above difference. When starting the system steam enters the thermodynamic steam trap, the pressure causes the valve disc to rise to the condensate and the air is immediately released. When steam is released at high velocity, high velocity creates low pressure under the valve disc and pushes the valve disc to the belt, When pressure on the valve disc is formed in the chamber pushing the valve disc downward and against condensate . And when the pressure on the disc is reduced, the disc is lifted and the condensate is pushed out. The most commonly used thermodynamic steam trap in the market is the coin steam trap.

-  Types of Thermodynamic Steam Traps : Disc Type, Steam Jacketed

bay hoi dong tien

Bẫy Hơi Đồng Tiền

___________________________________________________

- Disc Steam Trap

+ Structure of Disc Steam Trap

Xem Chi Tiết: Bẫy Hơi Đồng Tiền

cau tao bay hoi dong tien

Cấu Tạo Bẫy Hơi Đồng Tiền

___________________________________________________

+ Operation of Disc Steam Trap

bay hoi dong tien

Nguyên Lý Hoạt Động Bẫy Hơi Đồng Tiền

___________________________________________________

Đặc Điểm Của Bẫy Hơi

- Cấu tạo đơn giản, kích thước gọn gàng.

- Đảm bảo cho hệ thống hoạt động ổn định

- Giảm thiểu tối đa lượng nước có trong hệ thống

- Giảm nguy cơ gây búa nước trong hệ thống

- Ngăn ngừa nước tích tụ và xả nước ra khỏi hệ thống

- Khi xả nước có gây ra tiếng ồn

- Excellent durability of stainless steel disc, seat, and ball float. Inbuilt air vent assembly to eliminate air-binding.

- All parts are installed at the bonnet, and the integral bonnet would be helpful for easy maintenance.

___________________________________________________

Application of Steam Trap

- For Application to larger capacity than thermodynamic trap such as heat exchanger, dryer, chemical plant, and various steam systems.

___________________________________________________

Lỗi Thường Gặp Khi Sử Dụng Bẫy Hơi

- Vị trí Lắp Đặt: Bẫy hơi thường được lắp đặt dưới bình góp, trước các thiết bị trên hệ thống đường ống và sau thiết bị trao đổi nhiệt. Ngoài ra bẫy hơi có thể đặt ở các vị trí khác theo ự cân nhắc tính toán và mục đích.

- Lỗi Khi Đóng: Lỗi khi đóng làm cho bẫy hơi xả lượng hơi lớn ra bên ngoài làm tiêu tốn nhiều năng lượng và chi phí vận hành, ảnh hưởng trực tiếp đến toàn bộ hệ thống.

- Lỗi Khi Mở: Khi lỗi mở làm cho nước ngưng trong bẫy hơi không được xả ra ngoài, làm nhiệt hơi đi qua bị giảm không đặt yêu cầu quy trình sản xuất. Ngoài ra làm ảnh hưởng tiêu tốn năng lượng và các chị phí vận hành.

- Vì thế nên bẫy hơi là thiết bị rất quan trong, cần phải kiểm tra bảo dưỡng thường xuyên tránh các trường hợp hy hữu sảy ra. Nó là thiết bị được hoạt động liên tục trong chu kỳ đóng mở nên không thể tránh được việc hỏng hóc sảy ra.

___________________________________________________

Lựa Chọn Bẫy Hơi

- Chất liệu: Inox 304, inox 316, inox 201 - Gang - Thép 

- Kiểu kết nối: Nối ren BS - NPT, nối bích tiêu chuẩn: JIS, BS,DIN,  ANSI

- Kích thước: DN15, Dn20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250,...

- Áp suất làm việc: 10kgf/cm2, 16kgf/cm2, 20kgf/cm2, 25kgf/cm2, 40kgf/cm2

- Nhiệt độ hoạt động: 300 độ C

- Điều khiển: Tự động

- Các loại bẫy hơi : Bẫy hơi đồng tiền, bẫy hơi gầu đảo, bẫy hơi phao, bẫy hơi lưỡng kim,...

- Hãng sản xuất: Yoshitake, YNV, NICOSON, WATSON, MIYAWAKI, TUNG LUNG ...

- Xuất xứ: Trung Quốc, Đài Loan, Nhật Bản, Hàn Quốc, Mỹ, ...

___________________________________________________

Mua Bẫy Hơi VINDEC

- Thời gian bảo hành 12 tháng theo tiêu chuẩn lắp đặt và sử dụng của nhà sản xuất.

- Miễn phí vận chuyển trong vòng 20 km nội thành Hà Nội.

- VINDEC cam kết cung cấp đúng chủng loại sản phẩm do chính hăng sản xuất mà chúng tôi đang cung cấp, đảm bảo chất lượng, đúng nguồn gốc, đầy đủ chứng từ nhập khẩu.

- Quý khách hàng có thể tìm kiếm hoặc Download về máy Catalogue sản phẩm vật liệu làm kín của hãng tại Website của chúng tôi với thông số kỹ thuật rõ ràng chính xác nhất của hãng.

- Thêm vào đó, VINDEC chúng tôi có Kho Hàng tại Hồ Chí Minh và có Kho Hàng + Xưởng Sản Xuất với diện tích trên 2.000m2 tại Hà Nội.

- VINDEC với năng lực và kinh nghiệm gần 20 năm cùng với đội ngũ kỹ sư giầu chuyên môn, chúng tôi tự đáp ứng được các dự án lớn về hàng BẪY HƠIVAN CÔNG NGHIỆP chúng tôi luôn đồng hành cùng phát triển.

Admin: VINDEC

Zalo
Hotline