Threaded Fittings | Phụ Kiện Ren Là Gì

What is Threaded Pipe Fitting

- Threaded fittings are used in non critical applications and when service fluid is at ambient temperatures such was instrument air, plant air, cooling water, potable water etc. As they do not require welding, they are used at places where welding is not permitted. Though ASME B16.11 provides dimensions for 1/8″ to 4″ size threaded fittings, normally in process plant, 1/2″ to 1-1/2″ fittings are used.

- Cung cấp phụ kiện ren inox- kẽm- đồng- thép rèn : Măng sông, Côn thu, Tê thu, Te đều, Bầu giảm, Nắp bịt, Rắc Co, Chếch 45, Cút 90 Độ, Lơ thu ren, Kép ren.

____________________________________________

Standards of Threaded Pipe Fittings

- Material of Threaded Fitting

+ Stainless Steel Threaded Fitting: ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F904L / ASTM A312/A403 TP304, TP304L, TP316, TP316L

+ Carbon Steel Threaded Fitting :: ASTM A105, A350 LF2, A106 Gr.B, A234 WPB

+ Bronze/Brass Threaded Fittings

+ Ductile Iron Threaded Fittings

- Dimension : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

- Pressure range: 2000LBS, 3000LBS, 6000LBS

- Size : 1/8"~4" (DN6~DN100)

- ASME B16.11 Forged fittings,Socket-Welding and Threaded

- MSS-SP-97 Integrally Reinforced Forged Branch Outlet Fittings Socket Welding, Threaded, and Buttwelding Ends

- MSS SP-79 Socket Welding Reducer Inserts ­

- MSS SP-83 Class 3000 Steel Pipe Unions Socket Welding and Threaded

- MSS SP-95 Swaged Nipples and Bull Plugs

- MSS SP-25 Standard Marking Systems for Valves, Fittings, Flanges and Unions

- ASME B1.20.1 Pipe Threads, General Purpose (Inch)

- ASTM A105 Carbon Steel Forgings for Piping Applications

- ASTM A181Carbon Steel Forgings, for General-Purpose Piping

- ASTM A182Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

- ASTM A350 Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

- ASTM A694Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure

- ASTM A961 Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

- GB/T 14383 Forged fittings,Socket-Welding and Threaded

- GB/T 19326Forged Branch Outlet Fittings Socket Welding, Threaded, and Buttwelding

- HG/T 21632Forged Branch Outlet Fittings Socket Welding, Threaded, and Buttwelding

- HG/T 21634Forged Socket Welding Pipe Fittings,

- SH 3410 Forged Steel Socket-Welding Fittings

____________________________________________

Types of Threaded Pipe Fittings by Materials

Copper Threaded Fittings (Bronze Threaded Fittings, Brass Threaded Fittings), Forged Steel Threaded Fittings, Stainless Steel Threaded Fittings, Ductile Iron Threaded Fittings

____________________________________________

• Bronze/Brass Threaded Fittings

____________________________________________

• Forged Steel Threaded Fittings

____________________________________________

• Stainless Steel Threaded Fittings

____________________________________________

• Ductile Iron Threaded Fittings

____________________________________________

Different Type of Threaded Fittings

• 90° Elbow Thread Fittings

Used for 90 degree turn of piping in threaded piping systems. Available size range is from 1/8" to 4" as per ASME B16.11.

____________________________________________

• 45° Elbow Thread Fittings

Used for 45 degree change in direction of piping. Available size range is from 1/8″ to 4″ as per ASME B16.11.

____________________________________________

• Tee Thread Fittings

Threaded Straight and Reducing Tee: Used for 90 degree branch connection of same or reducing size. Available size range is from 1/8″ to 4″ as per ASME B16.11.

____________________________________________

• Cross Thread Fittings

Threaded Cross: These are sparingly used to reduce inventory. Two tees used instead. Available size range is from 1/8″ to 4″ as per ASME B16.11.

____________________________________________

• Full Coupling Thread Fittings

Threaded Full Coupling: Used to connect one piece of pipe to another in straight direction. Available size range is from 1/8″ to 4″ as per ASME B16.11.

____________________________________________

• Half Coupling Thread Fittings

Threaded Half Coupling : Used for connecting small bore threaded branch to large bore welded pipe. Available size range is from 1/8″ to 4″ as per ASME B16.11.

____________________________________________

• Reducing Coupling Thread Fittings

Threaded Reducing Coupling; These fittings are used as reducer in threaded piping networks. Available size range is from 1/8″ to 4″ as per ASME B16.11.

Threaded Reducing Coupling

____________________________________________

• Pipe Cap Thread Fittings

Used to close end of pipe. Available size range is from 1/8″ to 4″ as per ASME B16.11.

____________________________________________

• Hex Head Bushing Thread Fittings

Threaded Hexagon Bushing: These are used as reducers in threaded piping network by connecting smaller size pipe to bigger size female threaded fitting. Available size range is from 1/8″ to 4″ as per ASME B16.11.

Threaded Hexagon Bushing

____________________________________________

• Hex Head Plug Thread Fittings

Threaded Hex Plug: Used to close one end of threaded fitting such as Tee or Elbow etc. Available size range is from 1/8″ to 4″ as per ASME B16.11.

Threaded Hex Plug

 

____________________________________________

• Square Head Plug Thread Fittings

Square Head Plug: Used to close one end of female threaded fitting for future expansion. Available size range is from 1/8″ to 4″ as per ASME B16.11.

Square Head Plug

____________________________________________

• Round Head Plug Thread Fittings

Threaded Round Head Plug: Used to close vent and drain holes of valves, steam traps etc. Also to close end of female threaded pipe fittings. Available size range is from 1/8″ to 4″ as per ASME B16.11.

Threaded Round Head Plug

____________________________________________

• Union Thread Fittings

Threaded Unions: Unions permits easy installation, removal or replacement of lengths of pipe, valves or vessels in screwed piping systems. To remove a valve it must have at least one adjacent union and to remove piping from a vessel with threaded connections, each outlet from the vessel should have one union between valve and vessel.Inside Union, ground faced joints are preferred, although other facings are available.

Threaded Unions

 

____________________________________________

• Hex Nipple Thread Fittings

 

____________________________________________

• Street Elbow Thread Fittings

 

____________________________________________

• Bull Plug Thread Fittings

 

____________________________________________

• Boss Thread Fittings

 

____________________________________________

• Swage Nipple Thread Fittings

 

____________________________________________

• Pipe Nipple Thread Fittings

Both End Threaded Nipple: Made from standard pipe piece as per project requirement. Used to connect two threaded fittings near to each other. OD is as per standard pipe dimensions.

Both End Threaded Nipple

 

____________________________________________

• Adapter Thread Fittings

 

____________________________________________

• Union (Male x Female) Thread Fittings

 

____________________________________________

• Branch Outlet Thread Fittings

 

____________________________________________

• 90° Elbow Outlet Thread Fittings

 

____________________________________________

• 45° Lateral Tee Thread Fittings

 

____________________________________________

• Lateral Outlet Thread Fittings

 

____________________________________________

• Nipple Branch Outlet Thread Fittings

____________________________________________

 

• Threaded Close Nipple

OD is as per standard pipe dimensions. Length is as per project requirement. Made from standard pipe piece.

Threaded Close Nipple

____________________________________________

 

• POE TOE Nipple

Used to connect socket weld small bore piping to threaded small bore piping. OD is as per standard pipe dimensions. Length is as per project requirement.

POE TOE Nipple

____________________________________________

• Threaded Pipe to Tube Connector

Typical use is to connect instrumentation tubes to Air Pipes. Also used for Analyser Tubing.

Threaded Pipe to Tube Connector

____________________________________________

 

• Threaded Reducing Insert

These fittings are used to connect two female threaded fittings of different sizes to each other.

Threaded Reducing Insert

____________________________________________

 

• Threaded Flush Bushing

Threaded Flush Bushing : Used to connect reduced size pipe to larger size female threaded fitting. Available size range is from 1/8″ to 4″ as per ASME B16.11.

Threaded Flush Bushing

_______________________________________________

Advantages of Threaded Fittings

- Threaded joints can be easily made from pipe and fittings on site.

- They minimize fire hazard when installing in areas where flammable gases and liquids are present.

_______________________________________________

Disadvantages of Threaded Fittings

- Use of threaded joints is not permitted by ANSI B31.1 if sever erosion, crevice corrosion, shock or vibration is anticipated, nor at temperatures over 925 F.

- Chances of leakage are high with threaded joints.

- Seal welding may be required in more risky situations.

- For threaded joints, strength of pipe is reduced as forming the screw thread reduces the wall thickness.

_______________________________________________

Báo Giá Phụ Kiện Ren VINDEC

_______________________________________________

Mua Phụ Kiện Ren VINDEC

- VINDEC là địa chỉ phân phối Phụ Kiện Ren uy tín tại Việt nam có thể làm hài lòng khách hàng với năng lực đội ngũ nhân viên có kỹ thuật trình độ kỹ thuật cao, được đào tạo chuyên nghiệp bài bản của hãng.

- Quý khách hàng có thể tìm kiếm hoặc Download về máy Catalogue của chúng tôi với thông số kỹ thuật rõ ràng chính xác nhất của hãng tại: Phụ Kiện Ren

- Thêm vào đó, VINDEC chúng tôi có Kho Hàng tại Hồ Chí Minh và có Kho Hàng + Xưởng Sản Xuất với diện tích trên 2.000m2 tại Hà Nội.

- VINDEC với năng lực và kinh nghiệm trên 12 năm cùng với đội ngũ kỹ sư giầu chuyên môn, chúng tôi tự đáp ứng được các dự án lớn về hàng Phụ Kiện Ren Tại Việt Nam, chúng tôi luôn đồng hành cùng phát triển.

Admin: VINDEC

Zalo
Hotline