Virgin PTFE Rod

Virgin PTFE Rod

• Virgin PTFE Rod is goods manufactured with 100% virgin PTFE resin. PTFE rod has two types, extruded PTFE rod and moulded PTFE rod.
• The diameter from 4 to 250mm is extruded PTFE rod and the diameter of moulded PTFE rod is 300 to 500mm.

Technical Virgin PTFE Rod

• Colour: White
• Density (g/cm³): 2.1 ~ 2.3 g/cm3
• Tensile strength (Mpa): >15 Mpa
• Max temperature (°C): -180 to 260 ˚C
• Melting Point: 327℃
• Dielectric Strength: 10 Kv/mm
• Max pressure (Kg/cm2): 12 Bar
• Elongation at break: 200%
• Shore D Hardness: 50 to 60
• Dielectric strength: 10 KV/mm
• Friction coefficient . 0.01
• Length standard: 1000 mm
• Diameter: Ø4 mm - Ø500 mm

Diameter of Virgin PTFE Rod

• - Virgin PTFE rod Ø6 mm
• - Virgin PTFE rod Ø8 mm
• - Virgin PTFE rod Ø10 mm
• - Virgin PTFE rod Ø15 mm
• - Virgin PTFE rod Ø20 mm
• - Virgin PTFE rod Ø30 mm
• - Virgin PTFE rod Ø40 mm
• - Virgin PTFE rod Ø50 mm
• - Virgin PTFE rod Ø60 mm
• - Virgin PTFE rod Ø70 mm
• - Virgin PTFE rods Ø80 mm
• - Virgin PTFE rod Ø90 mm
• - Virgin PTFE rod Ø100 mm
• - Virgin PTFE rod Ø120 mm
• - Virgin PTFE rod Ø150 mm
• - Virgin PTFE rod Ø200 mm
• - Virgin PTFE rod Ø250 mm
• - Virgin PTFE rod Ø300 mm
• - Virgin PTFE rod Ø350 mm

Key Features of PTFE Rod

• - PTFE rod has excellent electrical resistance
• - PTFE rod is water repellent and can be used in the manufacture of modern high performing, water repellent and breathable clothing
• - PTFE rodhas an outstanding co-efficient of friction
• - PTFE rod also has a very good acid and chemical resistance
• - Easily outperform other engineering plastics by being able to perform continuously at temperatures of -250°C, right up to an +260°C
• - Another feature of PTFE is its ability to set by or due to compression

Why Should You Choose PTFE Rod

• - PTFE rodt offers super low friction, high chemical resistance, low and high temperature capability, resistance to weathering, electrical and thermal insulation, and unrivalled "slipperiness"

Is PTFE Rod Chemical Resistant

• - PTFE is pretty much safe against most known elements and compounds. It is attacked only by the alkaline metals in the elementary state, by chlorine trifluoride, and by elementary fluorine at high temperatures and pressures.
• - PTFE doesn’t dissolve in most solvents at temperatures up and around 300°C. Fluorinated hydrocarbons can cause an amount of expansion which is not permanent.
• - Some oils which are highly fluorinated and at temperatures over 300°C can inflict a dissolving affect upon this excellent engineering plastic.

Application of PTFE Rod

 PTFE rod has the characteristics of high chemical resistance,high insulation,non-stick, low friction and long life.It is used by machine parts such as, connectors, terminals and other electrical parts.

• - Chemical Manufacturing
• - Food Equipment
• - Pharmaceutical Plants
• - Petrochemical
• - Steel Manufacturing
• - Distilling
• - Food and Beverage
• - Pulp and Paper Processing
• - Power Generation
• - Marine
• - Automotive
• - Hydraulic Fittings
• - Hydraulic Cylinders
• - Pneumatic Cylinders
• - Valves and Pumps
• - Plumbing Products
• - Earthmoving & Construction Equipment